Airsoft Gun Upgrades

Airsoft Gun Upgrades



Quick View
CNC Aluminum Double Air Seal & Damper AEG Cylinder Head

CNC Aluminum Double Air Seal & Damper AEG Cylinder Head

Brand: MAXX

Product Code: MX-CYL001CHS

$14.98


CNC Aluminum Double Air Seal & Damper AEG Cylinder Head
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (19.50mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (19.50mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ1950AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (19.50mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (20.50mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (20.50mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2050AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (20.50mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (20.75mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (20.75mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2075AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (20.75mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (21.00mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (21.00mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2100AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (21.00mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (21.25mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (21.25mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2125AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (21.25mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (21.50mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (21.50mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2150AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (21.50mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (21.75mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (21.75mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2175AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (21.75mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (22.00mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (22.00mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2200AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (22.00mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (22.25mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (22.25mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2225AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (22.25mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Air Seal Nozzle (22.50mm) for Airsoft AEG Series

CNC Aluminum Double O-Ring Air Seal Nozzle (22.50mm) for Airsoft AEG Series

Brand: MAXX

Product Code: MX-NOZ2250AL

$9.98


CNC Aluminum Double O-Ring  Air Seal Nozzle (22.50mm) for Airsoft AEG Series
Quick View
CNC Aluminum Double O-Ring  Ball Bearing AEG Piston Head

CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

Brand: MAXX

Product Code: MX-PIS001PHS

$14.98


CNC Aluminum Double O-Ring  Ball Bearing AEG Piston Head
Quick View
CNC Aluminum Hopup Chamber IE - PRO

CNC Aluminum Hopup Chamber IE - PRO

Brand: MAXX

Product Code: MX-HOP004PRO

$59.98

CNC Aluminum Hopup Chamber IE Pro with Latching System unit is specifically designed for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series use only, and prevents dropping BBs after removing magazine.
The Hopup Chamber IE unit is machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability for your ICS CXP/CS4/EBB M4/M16 series Airsoft Rifles.
The Hopup Chamber IE unit is equipped with 2 Vinyl Covers on both sides of hopup housing to prevent dust and view the BBs that left inside the hopup chamber.
The Hopup Chamber IE unit has a Dial Knob built-in for precise adjustments and specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently to keep the BBs shooting straight and accurate on every single shot. CNC Brass Threaded Slot Pin can be also easily removable for adjustment and maintenance.
The Hopup Chamber IE unit is well engineered to accept wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber IE Housing is equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times.
More than that, the Hopup Chamber IE Pro unit is specially designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine.
And yet, the Latching System will be automatically opened fully for fast shooting after the magazine re-inserted. The Latching System can be also manually opened to release BBs from Hopup Chamber by hand.

***LED and Electronic Modules can be also added onto this hopup chamber unit as an option for BBs to glow in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad).
***Test results: FPS might be increased by 5% to 10%. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber IE Pro with Latching System unit
2 x CNC Vinyl Covers
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring

 

  Specification
Overall Length: 52.25mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Specifically designed for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series only
Designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine
Automatically opened Latch fully for fast shooting after the magazine re-inserted
Manually opened Latch to release BBs from Hopup Chamber by hand
Dial Knob built-in for precise adjustments
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently
Removable Brass Threaded Slot Pin for adjustment and maintenance
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times
Equipped with 2 Vinyl Covers on both sides of hopup housing to prevent dust and view the BBs that left inside the hopup chamber
LED and Electronic Modules ready! Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad)

 

  Weight
N/A grams

 

  Usage
Used for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series only
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

CNC Aluminum Hopup Chamber IE - PRO
CNC Aluminum Hopup Chamber IE Pro with Latching System unit is specifically designed for ICS CXP/CS4/..
$59.98
Quick View
CNC Aluminum Hopup Chamber IE - PRO w/ LED

CNC Aluminum Hopup Chamber IE - PRO w/ LED

Brand: MAXX

Product Code: MX-HOP004PRL

$74.98

Release date

The Hopup Chamber IE - PRO W/ LED is expected to be released on August 25, 2017.

LIMITED QUANTITIES - RESERVE YOUR HOPUP CHAMBER IE PRO W/ LED NOW!

CNC Aluminum Hopup Chamber IE Pro with Latching System & LED unit is specifically designed for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series use only, and prevents dropping BBs after removing magazine.
The Hopup Chamber IE unit is machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability for your ICS CXP/CS4/EBB M4/M16 series Airsoft Rifles.
The Hopup Chamber IE unit has a Dial Knob built-in for precise adjustments and specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently to keep the BBs shooting straight and accurate on every single shot. CNC Brass Threaded Slot Pin can be also easily removable for adjustment and maintenance.
The Hopup Chamber IE unit is well engineered to accept wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber IE Housing is equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times.
More than that, the Hopup Chamber IE Pro unit is specially designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine.
And yet, the Latching System will be automatically opened fully for fast shooting after the magazine re-inserted. The Latching System can be also manually opened to release BBs from Hopup Chamber by hand.
LED and Electronic Modules are also included with this hopup chamber unit for BBs to glow in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad).

***Test results: FPS might be increased by 5% to 10%. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber IE Pro with Latching System unit
1 x LED and Electronic Modules set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring

 

  Specification
Overall Length: 52.25mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Specifically designed for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series only
Designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine
Automatically opened Latch fully for fast shooting after the magazine re-inserted
Manually opened Latch to release BBs from Hopup Chamber by hand
Dial Knob built-in for precise adjustments
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently
Removable Brass Threaded Slot Pin for adjustment and maintenance
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times
Included LED and Electronic Modules to glow BBs in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad)

 

  Weight
N/A grams

 

  Usage
Used for ICS CXP/CS4/EBB M4/M16 Airsoft Rifle series only
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

CNC Aluminum Hopup Chamber IE - PRO w/ LED
Release date The Hopup Chamber IE - PRO W/ LED is expected to be released on August 25, 2017. LIMIT..
$74.98
Quick View
CNC Aluminum Hopup Chamber TE - PRO

CNC Aluminum Hopup Chamber TE - PRO

Brand: MAXX

Product Code: MX-HOP003PRO

$54.98

CNC Aluminum Hopup Chamber TE Pro with Latching System unit is specifically designed for fast feeding BBs and prevent dropping BBs after removing magazine on M4/M16 series AEG Airsoft Rifles.
The Hopup Chamber TE unit is machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability for your airsoft rifles.
The Hopup Chamber TE unit is equipped with 2 Vinyl Covers on both sides of hopup housing to prevent dust and view the BBs that left inside the hopup chamber.
The Hopup Chamber TE unit has a Dial Knob built-in for precise adjustments and specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently to keep the BBs shooting straight and accurate on every single shot. CNC Brass Threaded Slot Pin can be also easily removable for adjustment and maintenance.
The Hopup Chamber TE unit is well engineered to accept wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber TE Housing is equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 12mm bore.
More than that, the Hopup Chamber TE Pro unit is specially designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine.
And yet, the Latching System will be automatically opened fully for fast shooting after the magazine re-inserted. The Latching System can be also manually opened to release BBs from Hopup Chamber by hand.

***LED and Electronic Modules can be also added onto this hopup chamber unit as an option for BBs to glow in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad).
***Test results: FPS might be increased by 5% to 10%. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber TE Pro with Latching System unit
2 x CNC Vinyl Covers
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring

 

  Specification
Overall Length: 52.25mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast feeding BBs and prevent dropping BBs after removing magazine on M4/M16 series AEG Airsoft Rifles
Designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine
Automatically opened Latch fully for fast shooting after the magazine re-inserted
Manually opened Latch to release BBs from Hopup Chamber by hand
Dial Knob built-in for precise adjustments
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently
Removable Brass Threaded Slot Pin for adjustment and maintenance
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times
Equipped with 2 Vinyl Covers on both sides of hopup housing to prevent dust and view the BBs that left inside the hopup chamber
Compatible to any V2 gear boxes with 11mm or 12mm bore
LED and Electronic Modules ready! Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad)

 

  Weight
N/A grams

 

  Usage
Used for AEG version 2 gear box upgrades (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

CNC Aluminum Hopup Chamber TE - PRO
CNC Aluminum Hopup Chamber TE Pro with Latching System unit is specifically designed for fast feeding BBs and p..
$54.98
Quick View
CNC Aluminum Hopup Chamber TE - PRO w/ LED

CNC Aluminum Hopup Chamber TE - PRO w/ LED

Brand: MAXX

Product Code: MX-HOP003PRL

$69.98

Release date

The Hopup Chamber TE - PRO W/ LED is expected to be released on August 25, 2017.

LIMITED QUANTITIES - RESERVE YOUR HOPUP CHAMBER TE PRO W/ LED NOW!

CNC Aluminum Hopup Chamber TE Pro with Latching System & LED unit is specifically designed for fast feeding BBs and prevent dropping BBs after removing magazine on M4/M16 series AEG Airsoft Rifles.
The Hopup Chamber TE unit is machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability for your airsoft rifles.
The Hopup Chamber TE unit has a Dial Knob built-in for precise adjustments and specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently to keep the BBs shooting straight and accurate on every single shot. CNC Brass Threaded Slot Pin can be also easily removable for adjustment and maintenance.
The Hopup Chamber TE unit is well engineered to accept wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber TE Housing is equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 12mm bore.
More than that, the Hopup Chamber TE Pro unit is specially designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine.
And yet, the Latching System will be automatically opened fully for fast shooting after the magazine re-inserted. The Latching System can be also manually opened to release BBs from Hopup Chamber by hand.
LED and Electronic Modules are also included with this hopup chamber unit for BBs to glow in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad).

***Test results: FPS might be increased by 5% to 10%. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber TE Pro with Latching System unit
1 x LED and Electronic Modules set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring

 

  Specification
Overall Length: 52.25mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast feeding BBs and prevent dropping BBs after removing magazine on M4/M16 series AEG Airsoft Rifles
Designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine
Automatically opened Latch fully for fast shooting after the magazine re-inserted
Manually opened Latch to release BBs from Hopup Chamber by hand
Dial Knob built-in for precise adjustments
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-Hop precisely and consistently
Removable Brass Threaded Slot Pin for adjustment and maintenance
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with 3 O-rings, 3 Compression Springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times
Compatible to any V2 gear boxes with 11mm or 12mm bore
Included LED and Electronic Modules to glow BBs in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad)

 

  Weight
N/A grams

 

  Usage
Used for AEG version 2 gear box upgrades (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

CNC Aluminum Hopup Chamber TE - PRO w/ LED
Release date The Hopup Chamber TE - PRO W/ LED is expected to be released on August 25, 2017. LIMITED QUANT..
$69.98
Quick View
CNC Stainless Steel/Aluminum Spring Guide

CNC Stainless Steel/Aluminum Spring Guide

Brand: MAXX

Product Code: MX-SPG001S3

$14.98

CNC Stainless Steel/Aluminum Spring Guides are designed to keep the spring in line and allow the spring to rotate on shaft during high compression, suitable for AEG version 2 gear box upgrades.
This Spring Guide is machined with an M5 thread on stainless steel hub to hold the stock securely and equipped thrust ball bearing to reduce spring stress and breakage during high speed spring compression. Made of Stainless Steel and Aluminum.

 

  Includes
1 x CNC Stainless Steel/Aluminum Spring Guide

 

  Specification
Hub Internal Thread: M5x0.80
Hub Outer Diameter: 16mm
Shaft Outer Diameter: 10.8mm
Shaft Length: 44.5mm
Overall Length: 51.5mm
Material: Stainless Steel and Aluminum

 

  Features
Stainless Steel and Aluminum construction
Machined M5 thread on stainless steel hub
Equipped thrust ball bearing to reduce spring stress and breakage
Aligned spring in line and rotate on shaft during high compression
Strong stainless steel hub chamfer shoulder designs

 

  Weight
14 grams

 

  Usage
Used for AEG version 2 gear box upgrades (M4, M16, MP5,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the spring guide with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

CNC Stainless Steel/Aluminum Spring Guide
CNC Stainless Steel/Aluminum Spring Guides are designed to keep the spring in line and allow the spring to rota..
$14.98
Quick View
CNC Stainless Steel/Aluminum Spring Guide Thru-Hole

CNC Stainless Steel/Aluminum Spring Guide Thru-Hole

Brand: MAXX

Product Code: MX-SPG001S1

$19.98

CNC Stainless Steel/Aluminum Spring Guide Thru-Hole is specifically designed for Bolt Recoil Shock System (BRSS) to keep the spring in line and allow the spring to rotate on shaft during high compression.
This Spring Guide Thru-Hole is machined with a 6.8mm through hole on stainless steel hub to allow the pushrod to go through thrust bearing and spring guide without any restriction.
The Spring Guide Thru-Hole is also equipped thrust ball bearing to reduce spring stress and breakage during high speed spring compression. Made of Stainless Steel and Aluminum.

 

  Includes
1 x CNC Stainless Steel/Aluminum Spring Guide Thru-Hole

 

  Specification
Hub Thru-Hole Diameter: 6.8mm
Hub Outer Diameter: 16mm
Shaft Outer Diameter: 10.8mm
Shaft Inner Diameter: 7mm
Shaft Length: 44.5mm
Overall Length: 51.5mm
Material: Stainless Steel and Aluminum

 

  Features
Specifically designed for Bolt Recoil Shock System (BRSS)
Stainless Steel and Aluminum construction
Machined 6.8mm through hole on stainless steel hub
Allowed the pushrod to go through thrust bearing and spring guide without any restriction
Equipped thrust ball bearing to reduce spring stress and breakage
Aligned spring in line and rotate on shaft during high compression
Strong stainless steel hub chamfer shoulder designs

 

  Weight
13.08 grams

 

  Usage
Used for Bolt Recoil Shock System (BRSS)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the spring guide with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

CNC Stainless Steel/Aluminum Spring Guide Thru-Hole
CNC Stainless Steel/Aluminum Spring Guide Thru-Hole is specifically designed for Bolt Recoil Shock System (BRSS..
$19.98
Showing 1 to 18 of 21 (2 Pages)