Latest

Quick View
CNC Aluminum Hopup Chamber ME - SPORT

CNC Aluminum Hopup Chamber ME - SPORT

Brand: MAXX

Product Code: MX-HOP005SPO

$54.98

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with any V2 gear boxes with 11mm or 11.5mm bore
Specially designed with BB Catching System to prevent dropping BBs after removing the magazine
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.

New
CNC Aluminum Hopup Chamber ME - SPORT

CNC Aluminum Hopup Chamber ME - SPORT

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and en..

$54.98
Quick View
CNC Aluminum Hopup Chamber ME - SPORT w/ LED

CNC Aluminum Hopup Chamber ME - SPORT w/ LED

Brand: MAXX

Product Code: MX-HOP005SPL

$69.98

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.
The UV LED Tracer and Electronic Module are also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit
1 x UV LED Tracer and Electronic Module
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with any V2 gear boxes with 11mm or 11.5mm bore
Specially designed with BB Catching System to prevent dropping BBs after removing the magazine
Included the UV LED Tracer and Electronic Module to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.

New
CNC Aluminum Hopup Chamber ME - SPORT w/ LED

CNC Aluminum Hopup Chamber ME - SPORT w/ LED

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) & UV LED Tracer unit is precisely made to imp..

$69.98
Quick View
CNC Aluminum Hopup Chamber ME - PRO

CNC Aluminum Hopup Chamber ME - PRO

Brand: MAXX

Product Code: MX-HOP005PRO

$59.98

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
2 x Strong Clear Vinyl Cover
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with any V2 gear boxes with 11mm or 11.5mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.

New
CNC Aluminum Hopup Chamber ME - PRO

CNC Aluminum Hopup Chamber ME - PRO

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensu..

$59.98
Quick View
CNC Aluminum Hopup Chamber ME - PRO w/ LED

CNC Aluminum Hopup Chamber ME - PRO w/ LED

Brand: MAXX

Product Code: MX-HOP005PRL

$74.98

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.
The UV LED Tracer and Electronic Module are also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
1 x UV LED Tracer and Electronic Module
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with any V2 gear boxes with 11mm or 11.5mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
Included the UV LED Tracer and Electronic Module to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.

New
CNC Aluminum Hopup Chamber ME - PRO w/ LED

CNC Aluminum Hopup Chamber ME - PRO w/ LED

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) & UV LED Tracer unit is precisely made to impro..

$74.98
Quick View
CNC Aluminum Hopup Chamber MI - SPORT

CNC Aluminum Hopup Chamber MI - SPORT

Brand: MAXX

Product Code: MX-HOP006SPO

$54.98

CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Sport unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Gear Box): min 11.5mm - max 12mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

New
CNC Aluminum Hopup Chamber MI - SPORT

CNC Aluminum Hopup Chamber MI - SPORT

CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit is precisely made to improve accuracy and en..

$54.98
Quick View
CNC Aluminum Hopup Chamber MI - SPORT w/ LED

CNC Aluminum Hopup Chamber MI - SPORT w/ LED

Brand: MAXX

Product Code: MX-HOP006SPL

$69.98

CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Sport unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine.
The UV LED Tracer and Electronic Module are also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit
1 x UV LED Tracer and Electronic Module
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Gear Box): min 11.5mm - max 12mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Included the UV LED Tracer and Electronic Module to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

New
CNC Aluminum Hopup Chamber MI - SPORT w/ LED

CNC Aluminum Hopup Chamber MI - SPORT w/ LED

CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) & UV LED Tracer unit is precisely made to imp..

$69.98
Quick View
CNC Aluminum Hopup Chamber MI - PRO

CNC Aluminum Hopup Chamber MI - PRO

Brand: MAXX

Product Code: MX-HOP006PRO

$59.98

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Gear Box): min 11.5mm - max 12mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

New
CNC Aluminum Hopup Chamber MI - PRO

CNC Aluminum Hopup Chamber MI - PRO

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit is precisely made to improve accuracy and ensu..

$59.98
Quick View
CNC Aluminum Hopup Chamber MI - PRO w/ LED

CNC Aluminum Hopup Chamber MI - PRO w/ LED

Brand: MAXX

Product Code: MX-HOP006PRL

$74.98

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.
The UV LED Tracer and Electronic Module are also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit
1 x UV LED Tracer and Electronic Module
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Gear Box): min 11.5mm - max 12mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
Included the UV LED Tracer and Electronic Module to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
-ICS CXP series
-ICS CS4 series
-ICS EBB series

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

ICS® is a registered trademark of ICS Enterprise Co., Ltd.

New
CNC Aluminum Hopup Chamber MI - PRO w/ LED

CNC Aluminum Hopup Chamber MI - PRO w/ LED

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) & UV LED Tracer unit is precisely made to impro..

$74.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Blue)

CNC Aluminum Advanced Trigger (Style A) (Blue)

Brand: MAXX

Product Code: MX-TRG001SAU

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Blue)

CNC Aluminum Advanced Trigger (Style A) (Blue)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Blue)

CNC Aluminum Advanced Trigger (Style B) (Blue)

Brand: MAXX

Product Code: MX-TRG001SBU

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Blue)

CNC Aluminum Advanced Trigger (Style B) (Blue)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Blue)

CNC Aluminum Advanced Trigger (Style C) (Blue)

Brand: MAXX

Product Code: MX-TRG001SCU

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Blue)

CNC Aluminum Advanced Trigger (Style C) (Blue)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style D) (Blue)

CNC Aluminum Advanced Trigger (Style D) (Blue)

Brand: MAXX

Product Code: MX-TRG001SDU

$19.98

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style D)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style D) (Blue)

CNC Aluminum Advanced Trigger (Style D) (Blue)

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style E) (Blue)

CNC Aluminum Advanced Trigger (Style E) (Blue)

Brand: MAXX

Product Code: MX-TRG001SEU

$19.98

CNC Aluminum Advanced Trigger (Style E) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style E)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style E) (Blue)

CNC Aluminum Advanced Trigger (Style E) (Blue)

CNC Aluminum Advanced Trigger (Style E) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Silver)

CNC Aluminum Advanced Trigger (Style A) (Silver)

Brand: MAXX

Product Code: MX-TRG001SAS

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Silver)

CNC Aluminum Advanced Trigger (Style A) (Silver)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Dark Earth)

CNC Aluminum Advanced Trigger (Style A) (Dark Earth)

Brand: MAXX

Product Code: MX-TRG001SAG

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Dark Earth)

CNC Aluminum Advanced Trigger (Style A) (Dark Earth)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Red)

CNC Aluminum Advanced Trigger (Style A) (Red)

Brand: MAXX

Product Code: MX-TRG001SAR

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Red)

CNC Aluminum Advanced Trigger (Style A) (Red)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Titan)

CNC Aluminum Advanced Trigger (Style A) (Titan)

Brand: MAXX

Product Code: MX-TRG001SAT

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Titan)

CNC Aluminum Advanced Trigger (Style A) (Titan)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style A) (Black)

CNC Aluminum Advanced Trigger (Style A) (Black)

Brand: MAXX

Product Code: MX-TRG001SAB

$19.98

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style A)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style A) (Black)

CNC Aluminum Advanced Trigger (Style A) (Black)

CNC Aluminum Advanced Trigger (Style A) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Silver)

CNC Aluminum Advanced Trigger (Style B) (Silver)

Brand: MAXX

Product Code: MX-TRG001SBS

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Silver)

CNC Aluminum Advanced Trigger (Style B) (Silver)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Dark Earth)

CNC Aluminum Advanced Trigger (Style B) (Dark Earth)

Brand: MAXX

Product Code: MX-TRG001SBG

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Dark Earth)

CNC Aluminum Advanced Trigger (Style B) (Dark Earth)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Red)

CNC Aluminum Advanced Trigger (Style B) (Red)

Brand: MAXX

Product Code: MX-TRG001SBR

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Red)

CNC Aluminum Advanced Trigger (Style B) (Red)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Titan)

CNC Aluminum Advanced Trigger (Style B) (Titan)

Brand: MAXX

Product Code: MX-TRG001SBT

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Titan)

CNC Aluminum Advanced Trigger (Style B) (Titan)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style B) (Black)

CNC Aluminum Advanced Trigger (Style B) (Black)

Brand: MAXX

Product Code: MX-TRG001SBB

$19.98

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style B)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style B) (Black)

CNC Aluminum Advanced Trigger (Style B) (Black)

CNC Aluminum Advanced Trigger (Style B) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Silver)

CNC Aluminum Advanced Trigger (Style C) (Silver)

Brand: MAXX

Product Code: MX-TRG001SCS

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Silver)

CNC Aluminum Advanced Trigger (Style C) (Silver)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Dark Earth)

CNC Aluminum Advanced Trigger (Style C) (Dark Earth)

Brand: MAXX

Product Code: MX-TRG001SCG

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Dark Earth)

CNC Aluminum Advanced Trigger (Style C) (Dark Earth)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Red)

CNC Aluminum Advanced Trigger (Style C) (Red)

Brand: MAXX

Product Code: MX-TRG001SCR

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Red)

CNC Aluminum Advanced Trigger (Style C) (Red)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Titan)

CNC Aluminum Advanced Trigger (Style C) (Titan)

Brand: MAXX

Product Code: MX-TRG001SCT

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Titan)

CNC Aluminum Advanced Trigger (Style C) (Titan)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style C) (Black)

CNC Aluminum Advanced Trigger (Style C) (Black)

Brand: MAXX

Product Code: MX-TRG001SCB

$19.98

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style C)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style C) (Black)

CNC Aluminum Advanced Trigger (Style C) (Black)

CNC Aluminum Advanced Trigger (Style C) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style D) (Silver)

CNC Aluminum Advanced Trigger (Style D) (Silver)

Brand: MAXX

Product Code: MX-TRG001SDS

$19.98

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style D)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style D) (Silver)

CNC Aluminum Advanced Trigger (Style D) (Silver)

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Quick View
CNC Aluminum Advanced Trigger (Style D) (Dark Earth)

CNC Aluminum Advanced Trigger (Style D) (Dark Earth)

Brand: MAXX

Product Code: MX-TRG001SDG

$19.98

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles.
The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards.
The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.
The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems.
The main pivot pin of the trigger is made from Titanium for maximum strength and durability.
The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
The Aluminum and Titanium construction makes this trigger very light and durable.
Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
With the unique shapes, stylish design and colors, we will have an option to fit your style needs.
***For users convince the trigger spring is included.

 

  Includes
1 x CNC Aluminum Advanced Trigger (Style D)
1 x Setscrew
3 x Rubber Pad
1 x Titanium Pivot Pin
1 x Steel Trigger Spring

 

  Specification
Overall Length: 47.75mm
Overall Width: 7mm
Pivot Pin Diameter: 3mm
Material: Titanium/Aluminum 6061

 

  Features
Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards
Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
Titanium Pivot Pin for maximum strength and durability
Aluminum and Titanium construction, very light and durable
Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
Unique shapes, stylish design and colors

 

  Weight
N/A grams

 

  Usage
Used for Ver. 2 gear box AEG/HPA (M4, M16,...)

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

TITAN is a registered trademark of GATE Menet, Wojtak sp. j.
Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

New
CNC Aluminum Advanced Trigger (Style D) (Dark Earth)

CNC Aluminum Advanced Trigger (Style D) (Dark Earth)

CNC Aluminum Advanced Trigger (Style D) is specially designed for fast response, smooth and consistent trigger ..

$19.98
Showing 1 to 30 of 155 (6 Pages)